Undoubtedly, one of the most important parts of any MT system is the box. Because
this is not really my field, we asked a fellow industrial design firm in Zurich to assist
us in the design and construction of the box. Plans where made with my inputs, and
finally handed over to a local carpenter for the actual assembly. The box is hand crafted,
painted and delivered to us. Since this was done from an external pertner, I can not
share the exact plans or details. But I can say, that the box is exactly 70cm high, which
is the height most “normal” tables are too.

Company who desigend the box: Plasmadesign GmbH Zurich (http://www.plasmadesign.ch/)

Some Images of the box, when it is still empty and ready for rigging in the technical stuf

First, the plans where made by plasmadesign, according to my measurements (projector distance etc..)

Outside of the box, notice the wooden platform on which it sits. It has some wheels attached to the
bottom, this allows my to move it around easily. Very handy when instering the hardware..
You can also see the four precut holes on the back. We will use four PC fans to make sure that it doesn`t
get to hot in there.

Top View of the box. You can already see the cutout for the projected image, and a frame on the
far side, where I will insert some speakers and more fans.

Of course, we have a door on the backside, so we can acces the insides while it is running…

View from the inside…